PDA

View Full Version : Nooob to Xbox



Pigster
23-02-2004, 08:28 PM
Hello lads

I have just brought an Xbox and need help buying the correct mod etc
Would be nice as well to buy a new hard drive for the console, so please point me in the right directions...


Thx
for your help



Ps.....Anyone here fit xbox chips that live near Oxfordshire ?

Psymonkee
24-02-2004, 12:56 AM
JC's your man :)

He sorted me out at the GT LAN just this past weekend - which reminds me I still gotta settle up wif heeem :o

takes up to a max of 137GB I'm told so a nice 120gb drive would do the trick :E

but errr yea talk to JC :)

Pigster
24-02-2004, 01:03 AM
just opened the case and checked the holes were not soldered up (as I read some are)
they are not :) so I presume a Xecuter 2.3B Pro ( Pin Header Install ) will do the trick as I recall this was the same that JC carried out on the above...(psymonkee's)

JC can you confirm this is ok :)

thx m8

*JC*
24-02-2004, 02:42 AM
yup
try getting a Lite version instead of Pro m8, just a bit cheaper and doubt ya will need the pro.
i would try the wire install 1st m8, cos its easier to remove if it dont work, so then ya can try the pins.
biggest tip i can give is try to be as neat as pos with the soldering and use as small tipped soldering iron as pos.
get me on msn soon and ill mail ya the Install thing for when ya got ya chip in:)
gl m8

Pigster
24-02-2004, 08:25 PM
Jc am I correct in saying you dont need to take the motherboard out to install the Lite version wire ?
But would be easier if the Mb was taken out !

also the switch, I dont really need to put this on ? as its for live only ?

Sorry the questions

thx jc I will contact you as soon as I have the chip installed..

Piggy

[KIA5]Hairymoony
24-02-2004, 10:59 PM
i got the lite plus version and it works perfectly EXCEPT i have the thompson drive in my Xbox so atm i dont have any CD-R's that it will read to update the bios and put on EvolutionX dash on it

i have a DVD writer also but atm only +R's :@ so i got to wait untill i got some new media this week sometime

JC any help in this area would be GREATLY appriciated as atm i just turn off the mod chip and play xbox like normal but i wat to play my Haxor files that i "aquired"

Dalehead
24-02-2004, 11:44 PM
Piggy

As i offered m8, send me the 120gig disc, and i'll send it back loaded to the max if you like.

alba
24-02-2004, 11:50 PM
could u send me the install thingie JC? :)

*JC*
25-02-2004, 03:26 AM
get on supernova alba m8, its called Slayers Auto-Installer.
is about 200mb ish.
if ya cant find it gimme a shout.

Piggy
correct about wires m8, its better to remove the mobo really, and solder the wires on the back.
i mount the switch on the back next to the rj45 socket, and i never used live so i never really turn the mod off.

*JC*
25-02-2004, 03:29 AM
JC any help in this area would be GREATLY appriciated as atm i just turn off the mod chip and play xbox like normal but i wat to play my Haxor files that i "aquired"


just need 2 try dif discs m8, me used cd-rw in thompson drives and been ok, and some cd-r, pioneer drives have been worse for me. Just try blaggin discs off ppl ya know, then when ya find 1 that works get a load of em :)

shaft
25-02-2004, 11:36 PM
Send me your address and ill send you my evox installer, worked on mine and my kids drive, mine samsung theirs thompson. aaiiiiiighhht.

Psymonkee
26-02-2004, 01:10 AM
cd-rw is the bizz :-)

:D